先查看自動變速箱油是否過臟，油量是否充足，排除自動變速箱油不是過臟后接下來就可以開始對變速器檢查了
First check whether the automatic transmission oil is too dirty, whether the oil is sufficient, and then you can start to check the transmission after the automatic transmission oil is not too dirty
、檢查變速箱油是否夠及取一些變速箱油聞是否有燒焦氣味，如有說明變速箱內部離合片已燒掉，須大修變速器
First, check whether the transmission oil is enough and take some gearbox oil to smell whether there is burning smell. If there is any indication that the clutch plate inside the gearbox has been burned off, the transmission must be overhauled
第二、檢測變速箱系統是否有故障碼，如有根據故障碼提示維修
Second, check whether there is a fault code in the transmission system, if so, prompt maintenance according to the fault code
第三、可能是油路控制版內部閥體發卡，或者油道純在臟污雜質，導致自動擋控制閥產生延遲，造成變速箱頓挫沖擊
Third, it may be that the internal valve body of the oil circuit control version is jammed, or the oil passage is pure in dirt and impurities, resulting in the delay of the automatic shift control valve, causing the transmission to falter and impact
第四、可能是電磁閥故障
Fourth, may be the solenoid valve failure
以上故障都會導致自動變速箱換擋有沖擊發生。
All of the above faults will lead to the shift impact of automatic transmission.
